json_encode

(PHP 5 >= 5.2.0, PHP 7, PHP 8, PECL json >= 1.2.0)

json_encodeReturns the JSON representation of a value

Description

json_encode(mixed $value, int $flags = 0, int $depth = 512): string|false

Returns a string containing the JSON representation of the supplied value. If the parameter is an array or object, it will be serialized recursively.

If a value to be serialized is an object, then by default only publicly visible properties will be included. Alternatively, a class may implement JsonSerializable to control how its values are serialized to JSON.

The encoding is affected by the supplied flags and additionally the encoding of float values depends on the value of serialize_precision.

Parameters

value

The value being encoded. Can be any type except a resource.

All string data must be UTF-8 encoded.

Note:

PHP implements a superset of JSON as specified in the original » RFC 7159.

flags

Bitmask consisting of JSON_FORCE_OBJECT, JSON_HEX_QUOT, JSON_HEX_TAG, JSON_HEX_AMP, JSON_HEX_APOS, JSON_INVALID_UTF8_IGNORE, JSON_INVALID_UTF8_SUBSTITUTE, JSON_NUMERIC_CHECK, JSON_PARTIAL_OUTPUT_ON_ERROR, JSON_PRESERVE_ZERO_FRACTION, JSON_PRETTY_PRINT, JSON_UNESCAPED_LINE_TERMINATORS, JSON_UNESCAPED_SLASHES, JSON_UNESCAPED_UNICODE, JSON_THROW_ON_ERROR. The behaviour of these constants is described on the JSON constants page.

depth

Set the maximum depth. Must be greater than zero.

Return Values

Returns a JSON encoded string on success or false on failure.

Changelog

Version Description
7.3.0 JSON_THROW_ON_ERROR flags was added.
7.2.0 JSON_INVALID_UTF8_IGNORE, and JSON_INVALID_UTF8_SUBSTITUTE flags were added.
7.1.0 JSON_UNESCAPED_LINE_TERMINATORS flags was added.
7.1.0 serialize_precision is used instead of precision when encoding double values.

Examples

Example #1 A json_encode() example

<?php
$arr 
= array('a' => 1'b' => 2'c' => 3'd' => 4'e' => 5);

echo 
json_encode($arr);
?>

The above example will output:

{"a":1,"b":2,"c":3,"d":4,"e":5}

Example #2 A json_encode() example showing some flags in use

<?php
$a 
= array('<foo>',"'bar'",'"baz"','&blong&'"\xc3\xa9");

echo 
"Normal: ",  json_encode($a), "\n";
echo 
"Tags: ",    json_encode($aJSON_HEX_TAG), "\n";
echo 
"Apos: ",    json_encode($aJSON_HEX_APOS), "\n";
echo 
"Quot: ",    json_encode($aJSON_HEX_QUOT), "\n";
echo 
"Amp: ",     json_encode($aJSON_HEX_AMP), "\n";
echo 
"Unicode: "json_encode($aJSON_UNESCAPED_UNICODE), "\n";
echo 
"All: ",     json_encode($aJSON_HEX_TAG JSON_HEX_APOS JSON_HEX_QUOT JSON_HEX_AMP JSON_UNESCAPED_UNICODE), "\n\n";

$b = array();

echo 
"Empty array output as array: "json_encode($b), "\n";
echo 
"Empty array output as object: "json_encode($bJSON_FORCE_OBJECT), "\n\n";

$c = array(array(1,2,3));

echo 
"Non-associative array output as array: "json_encode($c), "\n";
echo 
"Non-associative array output as object: "json_encode($cJSON_FORCE_OBJECT), "\n\n";

$d = array('foo' => 'bar''baz' => 'long');

echo 
"Associative array always output as object: "json_encode($d), "\n";
echo 
"Associative array always output as object: "json_encode($dJSON_FORCE_OBJECT), "\n\n";
?>

The above example will output:

Normal: ["<foo>","'bar'","\"baz\"","&blong&","\u00e9"]
Tags: ["\u003Cfoo\u003E","'bar'","\"baz\"","&blong&","\u00e9"]
Apos: ["<foo>","\u0027bar\u0027","\"baz\"","&blong&","\u00e9"]
Quot: ["<foo>","'bar'","\u0022baz\u0022","&blong&","\u00e9"]
Amp: ["<foo>","'bar'","\"baz\"","\u0026blong\u0026","\u00e9"]
Unicode: ["<foo>","'bar'","\"baz\"","&blong&","é"]
All: ["\u003Cfoo\u003E","\u0027bar\u0027","\u0022baz\u0022","\u0026blong\u0026","é"]

Empty array output as array: []
Empty array output as object: {}

Non-associative array output as array: [[1,2,3]]
Non-associative array output as object: {"0":{"0":1,"1":2,"2":3}}

Associative array always output as object: {"foo":"bar","baz":"long"}
Associative array always output as object: {"foo":"bar","baz":"long"}

Example #3 JSON_NUMERIC_CHECK option example

<?php
echo "Strings representing numbers automatically turned into numbers".PHP_EOL;
$numbers = array('+123123''-123123''1.2e3''0.00001');
var_dump(
 
$numbers,
 
json_encode($numbersJSON_NUMERIC_CHECK)
);
echo 
"Strings containing improperly formatted numbers".PHP_EOL;
$strings = array('+a33123456789''a123');
var_dump(
 
$strings,
 
json_encode($stringsJSON_NUMERIC_CHECK)
);
?>

The above example will output something similar to:

Strings representing numbers automatically turned into numbers
array(4) {
  [0]=>
  string(7) "+123123"
  [1]=>
  string(7) "-123123"
  [2]=>
  string(5) "1.2e3"
  [3]=>
  string(7) "0.00001"
}
string(28) "[123123,-123123,1200,1.0e-5]"
Strings containing improperly formatted numbers
array(2) {
  [0]=>
  string(13) "+a33123456789"
  [1]=>
  string(4) "a123"
}
string(24) "["+a33123456789","a123"]"

Example #4 Sequential versus non-sequential array example

<?php
echo "Sequential array".PHP_EOL;
$sequential = array("foo""bar""baz""blong");
var_dump(
 
$sequential,
 
json_encode($sequential)
);

echo 
PHP_EOL."Non-sequential array".PHP_EOL;
$nonsequential = array(1=>"foo"2=>"bar"3=>"baz"4=>"blong");
var_dump(
 
$nonsequential,
 
json_encode($nonsequential)
);

echo 
PHP_EOL."Sequential array with one key unset".PHP_EOL;
unset(
$sequential[1]);
var_dump(
 
$sequential,
 
json_encode($sequential)
);
?>

The above example will output:

Sequential array
array(4) {
  [0]=>
  string(3) "foo"
  [1]=>
  string(3) "bar"
  [2]=>
  string(3) "baz"
  [3]=>
  string(5) "blong"
}
string(27) "["foo","bar","baz","blong"]"

Non-sequential array
array(4) {
  [1]=>
  string(3) "foo"
  [2]=>
  string(3) "bar"
  [3]=>
  string(3) "baz"
  [4]=>
  string(5) "blong"
}
string(43) "{"1":"foo","2":"bar","3":"baz","4":"blong"}"

Sequential array with one key unset
array(3) {
  [0]=>
  string(3) "foo"
  [2]=>
  string(3) "baz"
  [3]=>
  string(5) "blong"
}
string(33) "{"0":"foo","2":"baz","3":"blong"}"

Example #5 JSON_PRESERVE_ZERO_FRACTION option example

<?php
var_dump
(json_encode(12.0JSON_PRESERVE_ZERO_FRACTION));
var_dump(json_encode(12.0));
?>

The above example will output:

string(4) "12.0"
string(2) "12"

Notes

Note:

In the event of a failure to encode, json_last_error() can be used to determine the exact nature of the error.

Note:

When encoding an array, if the keys are not a continuous numeric sequence starting from 0, all keys are encoded as strings, and specified explicitly for each key-value pair.

Note:

Like the reference JSON encoder, json_encode() will generate JSON that is a simple value (that is, neither an object nor an array) if given a string, int, float or bool as an input value. While most decoders will accept these values as valid JSON, some may not, as the specification is ambiguous on this point.

To summarise, always test that your JSON decoder can handle the output you generate from json_encode().

See Also

Here you can write a comment


Please enter at least 10 characters.
Loading... Please wait.
* Pflichtangabe
There are no comments available yet.

PHP cURL Tutorial: Using cURL to Make HTTP Requests

cURL is a powerful PHP extension that allows you to communicate with different servers using various protocols, including HTTP, HTTPS, FTP, and more. ...

TheMax

Autor : TheMax
Category: PHP-Tutorials

Midjourney Tutorial - Instructions for beginners

There is an informative video about Midjourney, the tool for creating digital images using artificial intelligence, entitled "Midjourney tutorial in German - instructions for beginners" ...

Mike94

Autor : Mike94
Category: KI Tutorials

Basics of views in MySQL

Views in a MySQL database offer the option of creating a virtual table based on the result of an SQL query. This virtual table can be queried like a normal table without changing the underlying data. ...

admin

Autor : admin
Category: mySQL-Tutorials

Publish a tutorial

Share your knowledge with other developers worldwide

Share your knowledge with other developers worldwide

You are a professional in your field and want to share your knowledge, then sign up now and share it with our PHP community

learn more

Publish a tutorial